Micromax Evok Dual Note Stock Firmware Rom (Flash File) - On this page we will share the latest official Micromax E4815 firmware download link and the installation guide. the ROM file that we will share is a zip or rar archive file.

Micromax Evok Dual Note E4815 Firmware Flash File


In addition to the firmware files, we also share the flashing tool and the Micromax Evok Dual Note usb driver to make it easier for you to prepare the equipment before the flashing process starts.

The Firmware that is shared on this page is officially released by the company and helps you restore your device in case of bootloops, software errors, error updates, hanging and shutdown issues.

Micromax Evok Dual Note Specifications 

Display 5.5 inches,Full HD 1080 x 1920 pixels
OS Version Android 7.0 (Nougat)
Sim Dual Sim, Dual Standby
Chipset MediaTek MT6750T
Cpu Octa core (1.5 GHz, Quad core, Cortex A53 + 1 GHz, Quad core, Cortex A53)
Storage 32 GB
Ram 4 GB
Camera 13+5 MP / 5 MP

Back to Content


Micromax Evok Dual Note E4815 Stock Firmware (Scatter File)


File Name: Micromax_E4815_SW_V021_HW_V1.0_14062017.zip
File Size: 1,2 GB
Download Link: Via Google Drive / Mirror Link

File Name: Micromax_E4815_SW_V023_HW_V1.0_21082017.zip
File Size: 1,2 GB
Download Link: Via Google Drive / Mirror Link

File Name: Micromax_E4815_MT6750_SW_V024_HW_V1.0_20112017.zip
File Size: 1,2 GB
Download Link: Via Google Drive / Mirror Link

Micromax Evok Dual Note Flashtool & USB Driver


Back to Content


Disclaimer:

Don't forget back up files and data on your phone before installing Stock ROM. This can help you recover your personal data if an error occurs while flashing. All the risks that occur after flashing are not our responsibility. So make sure your phone's type and chipset are correct before downloading the above firmware.

How To Flash Stock Firmware On Micromax Evok Dual Note E4815


  1. Download and extract the materials required above
  2. Install USB driver. (skip this step if it has been installed before)
  3. Open flash_tool.exe in the flashtool folder.
  4. Click on "Scatter-loading" choose button and then choose the file scatter "MTxxxx_Android_scatter.txt" in the firmware folder.
  5. Select Format All + Download / Firmware Upgrade / Download Only. (please try to always select the firmware upgrade if file firmware is full address to minimize any risk)
  6. Next click the "Download" button.
  7. Power Off your phone and connect to computer while pressing the Volume (+) / (-) button simultaneously until device is detected so the flashing will start automatically.
  8. Ignore the Download Warning (if occured) and press Yes button.
  9. Wait until the process is 100% complete with green sign notification.
  10. Please try to turn the device on.
  11. Done.
Back to Content