Lava Z50 Stock Firmware Rom (Flash File) - On this page we will share the latest official Lava Z50 firmware download link and the installation guide. the ROM file that we will share is a zip or rar archive file.
Contents
In addition to the firmware files, we also share the flashing tool and the Lava Z50 usb driver to make it easier for you to prepare the equipment before the flashing process starts.
The Firmware that is shared on this page is officially released by the company and helps you restore your device in case of bootloops, software errors, error updates, hanging and shutdown issues.
Lava Z50 Specifications | |
---|---|
Display | 4,5 inches, 480 x 854 pixels, 16:9 ratio (~218 ppi density) |
OS Version | Android 8.1 Oreo |
Sim | Dual Sim, Dual Standby |
Chipset | MediaTek MT6737M |
Cpu | Quad-Core 1,1 Ghz Cortex-A53 |
Storage | 8 GB |
Ram | 1 GB |
Camera | 5MP / 5MP |
Back to Content
Lava Z50 Stock Firmware (Scatter File)
File Name: Lava_Z50_MT6737M_V1.0_S003_20171116_8.1.0.zip
File Size: 700MB
Download Link: Via Mediafire
Lava Z50 Flashtool & USB Driver
Back to Content
Disclaimer:
Don't forget you back up files and data on your phone before installing Stock ROM. This can help you recover your personal data if an error occurs while flashing. All the risks that occur after flashing are not our responsibility. So make sure your phone's type and chipset are correct before downloading the above firmware.
How To Flash Stock Firmware On Lava Z50
- Download and extract the materials required above
- Install USB driver. (skip this step if it has been installed before)
- Open flash_tool.exe in the flashtool folder.
- Click on "Scatter-loading" choose button and then choose the file scatter "MTxxxx_Android_scatter.txt" in the firmware folder.
- Select Format All + Download / Firmware Upgrade / Download Only. (please try to always select the firmware upgrade if file firmware is full address to minimize any risk)
- Next click the "Download" button.
- Power Off your phone and connect to computer while pressing the Volume (+) / (-) button simultaneously until device is detected so the flashing will start automatically.
- Ignore the Download Warning (if occured) and press Yes button.
- Wait until the process is 100% complete with green sign notification.
- Please try to turn the device on.
- Done.
Back to Content